PNI 200 gas detection equipment + 3/4 flap
The PNI Safe House 200 gas analyzer is designed to detect leaks of natural gas (methane), propane-butane mixture (propane, butane), and coal gas.
If the concentration of flammable gas exceeds 20% of the Lower Explosive Limit (LEL), the device activates a loud audible alarm (85 dB) and lights up a red LED, warning of potential danger.
The semiconductor sensor in the device is characterized by high reliability, a long service life (up to 5 years), and resistance to adverse environmental conditions.
Important: The sensor does not detect toxic gases (e.g., carbon monoxide CO).
Safety and Energy Efficiency
The PNI Safe House 200 is easy to install thanks to plug-and-play connectivity. The flame-retardant ABS plastic housing is resistant to corrosion, mold, pests, and is easy to maintain.
Due to its low power consumption (less than 3 W) and affordable cost, the device is an excellent choice for ensuring safety in residential and commercial premises.
Ideal for use in homes, restaurants, hospitals, hotels, gas stations, garages, in the oil and gas industry, and other facilities.
Sensor and Electromagnetic Valve Kit
The PNI Safe House 200 includes a gas detector and an electromagnetic valve, which work together to provide reliable protection in case of gas leaks.
How to test the operation?
To check the detector's operation:
Hold down the button of a gas lighter and bring it close to the sensor opening.
Carefully release the gas (do not ignite it!).
When the gas concentration reaches the critical level, the detector activates the alarm.
Note! After turning on the sensor, it needs 2-3 minutes to warm up, during which testing is not possible. After warming up, the device will emit a sound signal and enter the operating mode.
How to install correctly?
Natural gas (methane) is lighter than air, so it rises in the event of a leak. Installation recommendations:
The sensor should be placed 30 cm from the ceiling.
Distance from the gas source – at least 1.5 m.
Liquefied petroleum gas (propane, butane) is heavier than air and settles down. Installation recommendations:
The sensor should be mounted at a height of 30 cm from the floor.
Distance from the gas source – at least 1.5 m.
Important! Do not install the sensor in rooms with high humidity, as water vapor can negatively affect the sensor's operation and cause false alarms.
The PNI Safe House 200 is a reliable and easy-to-install device that will ensure the safety of your home, office, or enterprise, protecting against dangerous gas leaks.
Connection diameter, inch: | 3/4 |
The output voltage, V: | 9-12 |
Power supply, V: | 230 |
Power consumption, W: | 3 |
Maximum pressure supported, kPa: | 100 |
Sound intensity, dB/m: | ≥ 85 |
Gas density alarm level, %: | 0,1-0,5 |
Alarm level: | 20% LEL (Lower Explosive Limit) |
Ambient temperature, °C: | -40...+80 |
Body material: | Brass/Plastic |
Sizes, mm: | 115х72х41 |
Humidity, %: | ≤ 95% |