Submersible pump with bottom suction ESPA ACUARIA 07S 6M A
The submersible multistage pump ESPA ACUARIA 07S 6M A is a universal solution for stable clean-water supply from wells, boreholes, storage tanks, reservoirs and natural open sources. The model is built on a six-stage hydraulic system, which provides higher pressure and improved performance compared to lower-series versions.
The key advantage of the A modification is the integrated float switch, which fully controls pump operation depending on the water level. The float protects the equipment from dry running by automatically shutting the pump off when the water level drops below the allowed minimum. This significantly increases the motor and seal lifespan and ensures completely safe and autonomous operation.
The bottom water intake, equipped with a built-in coarse filter, allows the pump to operate at low water levels, effectively preventing sand, soil particles and large debris from entering the hydraulic system. The pump body is made from durable, corrosion-resistant materials — stainless steel and high-strength polymers — ensuring long-term wear resistance and protection against environmental impacts.
Forced water cooling between the motor housing and the external shell allows the pump to operate both fully and partially submerged — up to half of its length. This expands the application range and makes the model suitable for reservoirs of any type and depth.
Where ESPA ACUARIA 07S 6M A is used:
▪️ potable and domestic water supply for private homes;
▪️ automatic irrigation systems, drip irrigation, gardens and greenhouses;
▪️ supplying washing machines, dishwashers and other household appliances;
▪️ maintaining water levels in tanks, reservoirs and collection basins;
▪️ swimming pools, mini washing stations, decorative ponds;
▪️ farms and agricultural production systems;
▪️ pumping water from natural sources during seasonal level drops.
Advantages of ESPA ACUARIA 07S 6M A:
▪️ automatic water level control;
▪️ reliable motor protection against overheating and dry running;
▪️ increased pressure thanks to the 6-stage hydraulic system;
▪️ long service life due to double mechanical seal;
▪️ low energy consumption and high efficiency;
▪️ easy installation and maintenance;
▪️ ability to operate while partially submerged;
▪️ quiet operation without vibrations.
| Maximum pumping height, m: | 62 |
| Submersion depth, m: | 25 |
| The length of the power cable,m: | 15,0 |
| Revolutions Per Minute, r/min: | 2900 |
| Maximum sand content in water, g/m³: | 50 |
| Degree of protection: | IP68 |
| Height teh, mm: | 569 |
| Installation method: | Vertical |
| Max. liquid temperature, °C: | +40 |
| Coutry of brand: | Spain |
| Connection diameter, inch: | 1 |
| Weight, kg: | 12,4 |
| Tip motor: | Single phase |
| Impeller Material: | AISI 304 |
| Body material: | Stainless steel |
| Water consumption, m³/h: | 3,9 |
| Power, kW: | 0,9 |
| Maximum solids passage, mm: | 2 |