Quartz sleeve ECOSOFT UV Е-360 (530 mm)

The Ecosoft UV E-360 quartz sleeve (530 mm) is designed for use in Ecosoft E-360 ultraviolet disinfection systems. This high-tech component ensures UV lamp protection from direct water contact and maximizes UV light transmission.

Purpose and functions

The quartz sleeve serves two main purposes:

▪️Seals the UV lamp from water exposure, preventing short circuits and equipment failure;
▪️Allows UV radiation to pass into the water flow without significant loss, ensuring effective microorganism inactivation.

It is installed inside the UV unit, isolating the lamp while allowing water to flow around it and receive the required UV dose.

Technical specifications

▪️Material: high-transparency, heat-resistant quartz glass
▪️Compatibility: Ecosoft UV E-360 systems
▪️Shape: cylindrical with sealed ends
▪️UV transmittance: over 90% at 254 nm
▪️Operating temperature: up to 100 °C
▪️Diameter: standard fit for a secure, tight seal
▪️Manufacturer: Ecosoft

Advantages

▪️Maximum disinfection performance — quartz allows full UV penetration into the water stream;
▪️Safe operation — prevents water from reaching the lamp;
▪️Resistant to temperature changes and scaling;
▪️Long service life — maintains transparency for years with proper care;
▪️Perfect match for Ecosoft E-360 models — ensures tight sealing and optimal efficiency.

Usage recommendations

▪️Ensure the sleeve is clean before installation — any residue reduces UV effectiveness.
▪️Clean only with a soft cloth — avoid abrasives. For stubborn dirt, use diluted vinegar or citric acid.
▪️Inspect the sleeve when replacing the lamp. If cracked, cloudy, or coated — replace it.
▪️Store a spare sleeve in the original packaging, away from sunlight and humidity.

The Ecosoft UV E-360 quartz sleeve (530 mm) is a critical component of your UV disinfection system. It determines both equipment safety and water treatment performance. Use original Ecosoft parts — and your water will always be clean, safe, and drinkable.