Hydrophore EBARA AGA 1,00 M GO/0,75 kw (9m)

SELF-PRIMING ELECTRONIC PUMPS AGA-AGC made of cast iron

APPLICATION:

Increased blood pressure at home
Small scale garden irrigation
Car wash
Moving clean water in general
TECHNICAL DETAILS:

AGA 0.60 - 0.75 are also available in “G” versions, i.e. SAD (with handle, standard socket and 1.5 m cable) and “GI” (with handle, standard socket and 1.5 m cable and switch)
Available with brass turbine (AGA 0.60 M GO, AGA 0.75 M GO, AGA 1.00 M GO)
PUMP TECHNICAL DATA:

Maximum working pressure:
6 bar for AGA 0.60-0.75-1.00
10 bar for the rest of the range
Maximum liquid temperature: 45°C
Maximum suction depth: 8 m
Suction connection G1 for AGA 0.60-0.75-1.00, G1 ½ for the rest of the range
G1 output connection
ENGINE TECHNICAL DATA:

Highly efficient IE2 motors starting from 0.75 kW
Self-cooling 2-pole asynchronous motor
Insulation class F
Protection degree IP44
Single-phase voltage 230V±10%, 50Hz, three-phase voltage 230/400V±10%, 50Hz
Permanent capacitor and thermal and amperometric safety switch with automatic restart for single phase motor
User liability protection for three-phase version
MATERIAL:

Cast iron pump housing
Sealing disc in AISI 304 for AGA 0.60-0.75-1.00, integrated in cast iron motor housing for the rest of the range
Shaft made of AISI 303 (part in contact with liquid)
Turbine made of PPE+PS, reinforced with glass fiber for AGA 0.60-0.75-1.00, made of brass for the rest of the range
Mechanical seal carbon/ceramic/NBR
Injector and nozzle made of PPE+PS, reinforced with glass fiber