

Pedrollo HFm 50A is a medium‐power pump designed for steady water delivery in systems where volume, rather than pressure, is the priority. With enlarged connections and optimized hydraulics, it efficiently handles clean and slightly contaminated water with minimal losses. The pump features a single‐phase motor with built‐in thermal protection.
Construction Features
▪️ Cast‐iron casing with threaded connections
▪️ Brass impeller
▪️ AISI 430F stainless‐steel shaft
▪️ Mechanical seal: ceramic‐graphite‐NBR
▪️ Single‐phase motor with thermal protection
▪️ Protection class IP44, insulation class F
Operating Principle
The centrifugal impeller generates pressure by accelerating water from the center outward. This allows efficient horizontal delivery—such as transferring water between tanks—while maintaining consistent flow capacity.
Applications
▪️ Technical water‐supply systems
▪️ Agriculture (irrigation and drip systems)
▪️ Domestic water‐transfer systems
▪️ Drainage in low‐rise buildings
Why Buy from eurosanteh.md
By purchasing the Pedrollo HFm 50A from eurosanteh.md, you receive a high‐quality, Italian‐built pump with official warranty and fast delivery. Our engineers will assist you in adapting the pump to your system’s configuration.
Tip motor: | Single phase |
Power, kW: | 0,6 |
Maximum pumping height, m: | 12 |
Maximum depth, m: | 7 |
Noise level, dB: | 65 |
Weight, kg: | 9,2 |
Technical dimensions, mm: | 265x166x200 |
Body material: | Fonta |
Water consumption, m³/h: | 18,0 |
Inlet diameter, inch: | 1 1/2 |
Outlet diameter, inch: | 1 1/2 |
Installation method: | Horizontal |
Coutry of brand: | Italy |
Maximum working pressure, bar: | 6 |
Max. liquid temperature, °C: | +90 |