We sell, deliver and install climate control equipment throughout the Republic of Moldova
Product code: AE1F55E01
brand title

Heat pump Haier SUPER AQUA Monobloc GT R290, 12 kW, 1Ph, AW122MXGHA

Thermal power, KW: 12,0
1
166 719 mdl
148 856 mdl
visa logo master card logo
166 719 mdl
12 month
= 13 893.25 Lei/month
0% OVERPAYMENT
Installment is possible for physical and legal entities
Choosing a manager for consultation
Sabir Imamearov
Exp.: 12 years
Sabir Imamearov
Head Manager
+ 373 68 686 969
Call
Ion Mereacre
Exp.: 4 years
Ion Mereacre
Manager
+373 60 992 211
Call
Shipping and payment arrow down
You can view the shipping terms on the page Payment and delivery
Payment by card is possible:
visa logo master card logo maib gamma maib liber starcard
Installment plan for 0% for individuals and legal entities
Product Description

The Haier SUPER AQUA Monobloc GT R290 AW122MXGHA 12 kW is a high-performance single-phase air-to-water heat pump for properties requiring substantial heating capacity without switching to three-phase equipment. The model is designed for heating, cooling and domestic hot water preparation and can be used in spacious private houses, cottages and commercial premises.

The equipment belongs to the high-temperature Haier GT series using natural R290 refrigerant and combines an A+++ energy efficiency rating, inverter regulation and a wide operating temperature range.

 

High-temperature system up to 80 °C

 

A key feature of the Haier AW122MXGHA is its ability to operate with heating water temperatures of up to 80 °C. The flow temperature range in heating mode is 20–80 °C.

At outdoor air temperatures above –15 °C, water temperatures of up to 80 °C can be achieved without an additional electric heater. This makes the equipment suitable not only for modern underfloor heating systems but also for properties requiring higher flow temperatures.

Compatibility with low-temperature radiators makes the model an attractive option for upgrading heating systems and gradually transitioning from a traditional boiler to a heat pump.

 

Stable heating in winter

 

The system is designed to operate at outdoor temperatures as low as –25 °C. Inverter technology allows the equipment to adjust its output automatically as the outdoor temperature and the building’s thermal load change.

The DC Inverter Twin Rotary compressor provides smooth output regulation. The inverter-controlled circulation pump adjusts the heating water flow rate, while the brushless DC fan adapts the airflow speed.

As a result, the system continuously adapts to actual conditions rather than operating exclusively in “on” and “off” modes.

 

Comprehensive cooling in summer

 

The Haier SUPER AQUA GT R290 supports cooling operation with a water temperature from 5 to 25 °C. Combined with fan coil units, the heat pump becomes a central source of both heating and cooling for the entire building.

The outdoor operating temperature range for cooling is +10…+48 °C, allowing the equipment to be used even on the hottest days.

 

Two circuits and domestic hot water

 

Intelligent controls allow two heating or cooling zones to be managed independently. This makes it possible to create a combined system, for example with underfloor heating in living areas and radiators in the remaining rooms.

The controller supports domestic hot water (DHW) preparation through an external hot water cylinder, as well as interaction with solar thermal systems. Weather compensation curves automatically adjust the flow temperature according to the outdoor temperature.

 

Smartphone control

 

Wi-Fi support allows the user to monitor system status remotely. The Smart Grid Ready function provides additional opportunities to optimise equipment operation according to energy grid conditions.

The monobloc design simplifies installation: the system’s main components, including the heat exchanger and circulation pump, are housed within the outdoor module. A 4.5-litre expansion vessel and frost protection are provided.

The Haier SUPER AQUA Monobloc GT R290 12 kW AW122MXGHA is a high-performance solution for heating and cooling properties requiring high capacity, a single-phase connection and modern automation.

*The information about the product, its specifications, and price is provided for reference purposes only and may differ from the actual details. Before purchasing, we recommend confirming availability, parameters, the current price, as well as instalment terms and active promotions with a consultant to ensure all information is accurate.