Electric boiler E.C.A ARCEUS MT 24 KW
E.C.A. ARCEUS – is a line of fully equipped electric boilers designed for efficient heating and hot water supply.
The E.C.A. Arceus EK-MT 18 kW model is a dual-circuit boiler designed for organizing heating and hot water supply.
Advantages of E.C.A. Arceus boilers:
Quiet operation with a noise level of only 38 dB.
Compact dimensions, saving space during installation.
Ability to connect to single-phase or three-phase electrical networks.
Compatibility with the ErP system and energy-efficient pumps.
High power modulation speed for precise regulation.
Increased safety due to the contactor system and built-in fuse.
Heating elements (TENs) made of Inconel 800 alloy, resistant to corrosion.
Dual NTC temperature sensor system for precise and safe heating control.
Support for On/Off and modulating room thermostats.
Built-in anti-freeze protection.
Compliance with CE certificates.
Simple construction, facilitating maintenance and repair.
Minimal dimensions – 678 × 410 × 288 mm.
Principle of operation:
The boiler heats the water that enters the heat exchanger, where the heating elements are installed. The heated water is then supplied to the heating system through the outlet.
Depending on the model, ARCEUS boilers can be equipped with 3, 6, or 9 heating elements, which determine their power. Unlike gas boilers, which adjust power within narrow limits, ARCEUS electric boilers modulate heating by turning individual heating elements on or off. Each heating element operates at 100% power or is completely turned off, and the total thermal power is the sum of the active elements.
This technology ensures high precision in power regulation, stable heating, and energy efficiency, making ARCEUS boilers a reliable and economical solution for heating and hot water supply.
Power, kW: | 24,0 |
Type: | Electric |
Efficiency, %: | 99 |
Heating surface, m²: | 240 |
Amperage, A: | 35 |
Maximum pressure, bar: | 3 |
Display: | Yes |
Noise level, dB: | 38 |
The volume of the expansion vessel, l: | 8 |
Number of heat exchangers, units: | 2 |
Electrical power supply, V: | 380 |
Installation method: | Vertical |
Destination: | Heating/water supply |
Feed type: | Network |
Weight, kg: | 30,0 |
Energy efficiency class: | D |
Body material: | Stainless steel |
Sizes, mm: | 410x288x678 |
Coutry of brand: | Turkey |
Electrical safety class: | IP X4D |
Number of circuits, units: | 2 |
Control type: | Electronic |
Heating connection, inch: | 3/4 |
Fuel type: | Electicity |