Compression tee PN 6 bar, d. 32 x 1" x 32 (male)

The PN 6 bar 32 × 1″ × 32 (male) HDPE compression (clamp) tee is a practical fitting designed to add a 1″ male threaded outlet to a 32 mm HDPE (PE) pipeline. The straight run connects two 32 mm pipe sections, while the 90° branch provides a reliable connection point for valves, filters, water meters, manifolds, pressure regulators, or a separate irrigation line. It is an excellent choice when you need fast, tidy installation without soldering or welding equipment.

Typical applications

This 32×1″×32 male compression tee is commonly used for:

cold water supply lines in houses, outbuildings, and on-site networks;

irrigation and watering systems (zones, taps, timers, splitters);

technical piping and local distribution assemblies;

upgrades to existing lines when a new branch must be added quickly.

Material and durability

Made from high-density polyethylene (HDPE), the fitting:

is corrosion-resistant and will not rust;

withstands common water impurities and typical technical media;

maintains its shape and strength over long-term service.

The PN 6 bar rating is intended for standard operating conditions in water and technical systems where stable leak-tight joints are required.

Key benefits

No welding required: no electrofusion or specialized tools needed.

Leak-tight compression joint: threaded assembly and compression provide a secure grip on 32 mm pipe.

1″ male threaded outlet: quick connection to standard female-threaded components (valves, filters, fittings).

Demountable design: can be removed and reinstalled—useful for repairs and seasonal reconfiguration.

Compact, installer-friendly shape: easier work in trenches, manholes, and confined spaces.

Installation overview

Prepare the 32 mm pipe: make a clean, square cut and remove burrs (a light chamfer helps).

Loosen the nuts and insert the pipe fully to the stop.

Tighten the nuts clockwise to create compression and sealing.

Connect your equipment to the 1″ male thread, using an appropriate seal (PTFE tape/thread sealant as required).