Antiscalant Ecotec RO 3000 for reverse osmosis systems, 10 kg can.

ECOTEC RO 3010 Antiscalant is a liquid agent that combines the functions of an antiscalant and a dispersant. It is based on polymers and copolymers of acrylic acid, enhanced with phosphonates, ensuring effective prevention of scale formation and dispersion of colloidal particles in systems with thin-film composite (TFC) membranes and cellulose acetate membranes. The product also shows high efficiency against iron-containing compounds.

Main Advantages

▪️ Reliably disperses iron-containing compounds
▪️ Effectively prevents the formation of carbonate and sulfate scale
▪️ Actively breaks down colloidal and suspended impurities
▪️ Operates across a wide pH range and various water compositions
▪️ Reduces overall fouling in membrane systems by controlling crystallization
▪️ Ensures cost-effective system operation due to low dosage and reduced need for regeneration cleaning

Key Features

▪️ Extends membrane lifespan
Blocks the formation of mineral deposits, maintaining stable and efficient membrane system performance.

▪️ Flexible application for different water types
Dosage is adjusted according to feed water quality.

▪️ Economic efficiency
Helps reduce cleaning costs and the consumption of auxiliary reagents.

Mechanism of Action

The effect of ECOTEC RO 3010 is achieved through a combination of three processes:

▪️ Increased salt solubility — threshold effect prevents precipitation of poorly soluble inorganic salts, including calcium carbonate (CaCO₃).

▪️ Crystal deformation — breaks formed salt crystals into irregular fragments, preventing their deposition on membranes.

▪️ Impurity dispersion — prevents aggregation and sedimentation of fine crystals and colloidal particles.

Instructions for Use

ECOTEC RO 3010 is introduced into the water stream using dosing equipment before the reverse osmosis system. The standard dosage ranges from 3–8 mg/l, depending on the feed water quality and system parameters.

For maximum efficiency, it is recommended to inject the product before the cartridge filters. Optimal dosing conditions can be provided by the official supplier.