Compression tee PN 6 bar, d. 32 x 32 x 32

The PN 6 bar 32×32×32 HDPE clamp (compression) tee is an equal-through fitting for HDPE pipes that connects three pipeline sections of the same diameter. The side outlet is formed at a 90° angle to the main line, making the tee ideal for branching a main run—when you need to route a separate branch to another circuit, connect an additional line, or distribute flow within a system.

32 mm HDPE tees are widely used in outdoor and indoor cold water networks, irrigation systems, technical pipelines, at summer houses and private properties, and when assembling distribution nodes where fast installation and the ability to quickly adjust the layout are essential.

Material and durability

The fitting is made of high-density polyethylene (HDPE), which means it:

• does not rust and is not affected by corrosion (unlike metal connections);
• is resistant to most common chemicals and impurities found in water;
• maintains strength and shape during long-term operation.

The PN 6 bar pressure class is intended for typical operating conditions in water and technical systems where reliable joints and stable leak-tightness are required.

Benefits of the compression tee

Fast installation without welding: no soldering tools, electrofusion equipment, or complex tools are required.
Leak-tightness is ensured by threaded assembly and compression, resulting in a firm, stable joint.
Demountable design: the tee can be removed and reinstalled, which is convenient for repairs, rerouting, or seasonal irrigation reconfiguration.
Practical shape: the ergonomic body makes work easier in manholes, trenches, and tight installation areas.

How installation is performed

• Prepare the pipe: a straight cut without heavy burrs makes insertion easier and helps ensure a tight fit.
• Insert the HDPE pipe into the fitting seat until it stops.
• Tighten the nut clockwise—it will compress the joint and lock the pipe in place, forming a reliable branching node.

Where the 32×32×32 size is especially convenient

A 32 mm diameter is chosen when you need confident flow capacity and a neat branch off a main line without “bottlenecks.” This 32×32×32 polyethylene tee is a practical solution for both installers and private users: quick to assemble, reliably leak-tight, and easy to disassemble when needed—without unnecessary time costs.