Compression tee PN 6 bar, d. 110 x 110 x 110

Polyethylene compression tee PN 6 bar, 110×110×110 is an equal-bore HDPE (PE) fitting for large-diameter pipelines, designed to connect three pipe sections of the same size. The side outlet is positioned perpendicular to the main line, so the tee is used to branch the pipeline: to connect an additional circuit, distribute flow in different directions, or expand an existing network without welding and without complex installation equipment.

The 110 mm diameter is typically chosen for main routes and systems where high flow capacity and reliable junctions are critical. The compression connection allows a quick, neat branch assembly and, when necessary, makes it easier to service or reconfigure the section without dismantling large pipeline segments.

Material and operational durability

The fitting is made from low-pressure polyethylene, so it:

is corrosion-free and suitable for humid operating conditions;

is chemically inert — resistant to many substances and impurities that may be present in water and technical media;

is designed for long-term use within engineering networks.

The PN 6 bar rating is intended for standard operating conditions in water supply and technical systems, where stable leak-tightness is especially important.

Benefits of a 110 mm HDPE compression tee

No-weld installation: no fusion, electrofusion, or adhesives required.

Leak-tightness provided by threaded assembly and subsequent compression — a dense, reliable joint.

Demountable design: can be assembled/disassembled multiple times for repairs, maintenance, and upgrades.

Easier handling: an ergonomic shape helps in trenches, chambers, and hard-to-access areas.

A rational solution for branching same-diameter pipes — no reducers and no route complications.

How to install

Insert the HDPE pipe into the fitting seat until it stops, ensuring straight alignment.

Tighten the nut clockwise — it compresses the pipe and locks the joint, creating a leak-tight branching node.

Where it’s especially suitable

If you need a 110 mm HDPE compression tee for equal-bore branching of a main pipeline, the 110×110×110 PN 6 version is a practical choice. It speeds up installation, ensures reliable sealing, and keeps the system flexible: if the layout changes, the joint can be quickly disassembled and reassembled without unnecessary cost.